5 Best Table Saw Push Sticks and Push Blocks (October 2026)
The best table saw push sticks and push blocks include the POWERTEC Push Block and Push Stick Set for a full set of blocks and sticks, the Hedgehog Woodworking Push Block for Table Saws for a tall handle and a grippy base, and the BOW Products PushPRO Push Stick PP1 for a longer reach with a replaceable tip.
On this page (11 sections)
- The 5 best table saw push sticks and push blocks, in detail
- Side by side: the five push tools
- Materials and grips to compare
- Sizes, handles and shapes to match your cuts
- Where to keep push tools near the saw
- Replacing worn push tools
- Choosing between a block and a stick
- How we picked these five push tools
- Which push tool fits which cut?
- Push tools and kickback
- Which push stick or block should you buy?
A push stick or push block keeps your hand farther from the blade while you feed stock. The shape you need depends on the cut, and your saw's manual decides when each push tool should be used.
We compared five push tools by shape, handle, grip and the tools each maker names. Most are for table saws and jointers, so check the fit with your own saw before you order.
Push tools are accessories, not guards. Keep the guard, riving knife and fence set up as the manual says, and let the manual override anything on this page.
Our picks at a glance
-
1
Best for a full set of blocks and sticksPOWERTEC Push Block and Push Stick Set, 5 Pieces
8.5/10 our score
See it on Amazon -
2
Best for a tall handle and a grippy baseHedgehog Woodworking Push Block for Table Saws
8.2/10 our score
See it on Amazon -
3
Best for a longer reach with a replaceable tipBOW Products PushPRO Push Stick PP1
8.0/10 our score
See it on Amazon
- 4
Check itMicrojig GRR-RIPPER+ 3D Push Block With SafeRip Kit
Best for a fully adjustable push block - 5
Check itPOWERTEC Deluxe Push Stick, 2-Pack
Best for a simple pair of sticks for light work
The 5 best table saw push sticks and push blocks, in detail
Each push tool below has a different shape, so match the shape to the cut. The top pick covers several shapes, and the last one is the simplest pair.
POWERTEC Push Block and Push Stick Set, 5 Pieces
- Five pieces: long hold-down block, Safe V stick, straight push stick and two short hold-down blocks
- Dual ergonomic handles
- Fits table saws, router tables, band saws and jointers
Five push tools in several shapes, so you have a stick for one cut and a block for another. It suits a shop that wants a set on hand instead of a single tool.
Pros
- Five shapes in one set
- Dual ergonomic handles
- Covers table saws, router tables, band saws and jointers
Cons
- More pieces to store near the saw
- The manual decides which shape each cut needs
POWERTEC's set includes five pieces: a long hold-down push block, a Safe V stick, a straight push stick and two short hold-down blocks. That's several shapes in one set, so you're not buying each one as you need it.
The handles are dual ergonomic grips, and POWERTEC says the set fits table saws, router tables, band saws and jointers. Store the set near the saw so the right shape is close by.
The manual decides which shape each cut needs. Read that section before you use the set, and keep the blocks and sticks in good shape by replacing any worn pad.
Five pieces take more room to store than a single stick, so plan a spot on the saw or the bench for them.
Hedgehog Woodworking Push Block for Table Saws
- Extra-tall ergonomic handle
- Neoprene non-slip grip strip on the base
- Glass-fiber reinforced nylon body
- Fits table saws, jointers, router tables and band saws
A push block with a tall handle and a non-slip base. It suits a shop that pushes wide stock and wants a firm grip on the wood.
Pros
- Tall handle, which Hedgehog says keeps fingers higher above the blade
- Non-slip neoprene grip strip on the base
- Impact-resistant nylon body
Cons
- One block doesn't cover narrow stock
- The manual decides when a block is the right tool
The Hedgehog push block has an extra-tall handle, which the brand says keeps your fingers higher above the blade. It suits wide stock, where a firm downward grip on the wood matters.
The base has a neoprene non-slip grip strip, and the body is a glass-fiber reinforced nylon. Hedgehog says the body is built to take drops and heavy daily use.
A single block doesn't cover narrow stock, so check the manual for the shapes it recommends for narrow cuts.
Check your saw's manual for how and when a push block should be used, since a tall handle doesn't change those rules.
BOW Products PushPRO Push Stick PP1
- 17.5-inch push stick
- High-density EVA tip
- Tip can be replaced or reversed
- Non-marring tip on softer wood, per BOW
A long push stick with an EVA tip that can be replaced or reversed. It suits a shop that wants more distance between the hand and the blade.
Pros
- 17.5-inch length, which BOW says keeps hands farther from the cutting area
- Replaceable EVA tip
- Non-marring tip on softer wood, per BOW
Cons
- One stick, so it doesn't cover block work
- The tip wears and needs replacing over time
BOW's PushPRO is a 17.5-inch push stick with a high-density EVA tip. The long handle gives you more distance between your hand and the cutting area, as BOW describes it.
The tip is replaceable, and BOW says it can be replaced or reversed after accidental blade contact, so inspect the stick whenever that happens.
BOW says the EVA tip grips the wood and dampens vibration. It also says the tip doesn't mark softer wood, which suits trim and furniture stock.
It's a single stick, so it doesn't cover block work. Pair it with the manual's guidance for the shape each cut needs, and replace the tip when it wears.
Microjig GRR-RIPPER+ 3D Push Block With SafeRip Kit
- Fully adjustable 3D push block
- SafeRip kit included
- Green GRR-RIP grip on the base, per Microjig
- Works on table saws, router tables, jointers and band saws
A premium, fully adjustable push block with a SafeRip kit and a case. It suits a shop that wants one adjustable block for many stock sizes.
Pros
- Fully adjustable 3D shape
- SafeRip kit and case included
- Green GRR-RIP grip, per Microjig
Cons
- Premium price tier
- Setup takes time to learn from the manual
Microjig's GRR-RIPPER+ is a fully adjustable 3D push block with a SafeRip kit and a case. It's the most adjustable tool in this group, and Microjig says it works on table saws, router tables, jointers and band saws.
The base has a Green GRR-RIP grip, which Microjig says holds a wide range of materials, from hardwoods to plywood and plastics. The SafeRip kit is part of the package.
It's a premium tool, so it sits at the top of the price range here. Expect some time learning the adjustments, and follow the manual for the setup it describes.
If you want one adjustable block for many stock sizes, this is the one. If you want a simple tool, the POWERTEC pair is the better fit.
POWERTEC Deluxe Push Stick, 2-Pack
- Magnetic-type push stick, 11-21/32 inches long
- L-shaped push stick, 8-21/32 inches long
- Contoured ergonomic handle
- Two-pack
A two-pack of a straight magnetic-type stick and an L-shaped stick. It suits light work and a simple setup with two shapes on hand.
Pros
- Two sticks in one pack
- Contoured ergonomic handle, per POWERTEC
- Lower price tier than the blocks
Cons
- No push block for wide stock
- Two shapes cover fewer cuts than the five-piece set
POWERTEC's deluxe push stick is a two-pack, with a magnetic-type stick that's 11-21/32 inches long and an L-shaped stick that's 8-21/32 inches long. The handles are contoured, and POWERTEC calls them ergonomic.
It's the simplest pair here, and it suits light work and a basic setup. The L-shaped stick covers a different shape from the straight one.
The pair has no block, so it doesn't cover wide stock the way a push block does. Its shapes are fixed, so it covers fewer cuts than the five-piece set.
At the lower price tier here, it's a fair starting point for a shop that needs two sticks and not a full set.
Side by side: the five push tools
The push tools differ mainly in shape and count, so start with the shapes you need. The POWERTEC five-piece set covers the most shapes, and the POWERTEC two-pack covers the fewest.
| Product | Best for | Type | Pieces | Body | Our score |
|---|---|---|---|---|---|
| POWERTEC Push Block and Push Stick Set, 5 Pieces | a full set of blocks and sticks | Five-piece block and stick set | 5 | 8.5 | |
| Hedgehog Woodworking Push Block for Table Saws | a tall handle and a grippy base | Push block | Glass-fiber reinforced nylon | 8.2 | |
| BOW Products PushPRO Push Stick PP1 | a longer reach with a replaceable tip | Push stick with EVA tip | 8.0 | ||
| Microjig GRR-RIPPER+ 3D Push Block With SafeRip Kit | a fully adjustable push block | Adjustable 3D push block | 7.9 | ||
| POWERTEC Deluxe Push Stick, 2-Pack | a simple pair of sticks for light work | Magnetic and L-shaped push sticks | 7.6 |
The blocks cover wide stock and the sticks cover narrow work. The tools with longer handles give more distance from the blade, as their makers describe them.
Materials and grips to compare
The push tools here use a few materials. POWERTEC's set and two-pack use ergonomic handles, while Hedgehog's block uses glass-fiber reinforced nylon with a neoprene grip strip on its base.
BOW's stick uses an EVA tip, which BOW says conforms slightly to the wood and helps protect softer wood from dents. Microjig's block has a Green GRR-RIP grip on its base, which Microjig says holds a wide range of materials.
Grip shape matters too. POWERTEC describes its handles as ergonomic, and Hedgehog's handle is extra tall, which changes where your hand sits on the tool.
Sizes, handles and shapes to match your cuts
Length matters for reach, since BOW's stick is 17.5 inches long and POWERTEC's deluxe pair runs 11-21/32 and 8-21/32 inches. Longer sticks keep more distance between the hand and the blade, as the makers describe them.
Check the length against your saw's table and the stock you cut. A long stick can reach farther, but it can also be harder to handle on a small saw table.
Shapes differ as well. The POWERTEC set includes a V-shaped stick and short and long blocks, and the POWERTEC pair includes an L-shaped stick, so match the shape to the cut the manual describes.
Table saw push stick shapes for your shop
Start with the stock you cut most, since wide boards call for a block with a firm base and narrow stock calls for a shaped stick. A small shop with one saw may need only a few shapes.
Where to keep push tools near the saw
Keep push tools within reach of the saw, but off the table itself. A hook on the side of the cabinet or a rack beside the saw keeps them close without clutter.
Store them where a bumped tool can't fall onto the blade, and keep the blocks and sticks clean so the grip stays firm.
Wipe down a grip that's dusty or oily before you use it, since a slick handle is harder to control. Keep dust off the pads as well, so they keep their grip on the wood.
Replacing worn push tools
Check push tools before each session. Replace a stick or block if the pad, tip or handle is torn or loose.
BOW says its tip can be replaced after accidental blade contact, so check the tip after any contact. A cracked block or a loose handle is a reason to replace the tool, not to keep using it.
Keep the manufacturer's replacement parts list with the tool, so you can order a new tip or pad in the right size without guessing.
Check the tool's stated fit before you order a replacement, since a block made for jointers won't always suit your table saw. A tool that sits flat against the table and fits the saw's gap matters as much as its shape.
Choosing between a block and a stick
A stick is the better tool when the stock is narrow and your hand needs to stay well back. A block is the better tool when the stock is wide and you need firm downward pressure on the wood.
Both are for the cuts your manual calls for, so check the manual before you pick one. Many shops keep both on hand, since each covers a different kind of stock.
The POWERTEC five-piece set puts a block and a stick in one box, while the Hedgehog and Microjig blocks cover wide stock on their own. The BOW stick and the POWERTEC pair cover narrow work.
How we picked these five push tools
We compared the shape, handle, grip and the tools each maker names. Our score weighs specs, features and buyer feedback against what you're shopping for.
Here's how the scores landed:
- POWERTEC five-piece set, 8.5: five shapes in one set, so the most cuts covered.
- Hedgehog push block, 8.2: a tall handle and a non-slip base for wide stock.
- BOW PushPRO, 8.0: a 17.5-inch stick with a replaceable tip.
- Microjig GRR-RIPPER+, 7.9: a fully adjustable block, at the premium tier.
- POWERTEC two-pack, 7.6: a simple pair of sticks for light work.
Which push tool fits which cut?
For wide stock, a push block gives a firm grip, so the Hedgehog and the Microjig are the matches. For narrow work, a stick is the better shape, and the BOW and the POWERTEC pair cover that.
For a shop that wants one set, the POWERTEC five-piece covers both shapes. For one adjustable tool, the Microjig is the choice.
Checking a push tool against your saw
Check the tool's stated fit against your saw before you order, since a tool made for jointers or routers may not suit your table saw. Then check the manual for the shapes your saw expects.
Our how to use a table saw guide covers the setup steps in order, and it points back to the manual at each one.
Push tools and kickback
Push tools keep your hand farther from the blade, but they don't replace the rest of the setup. Our table saw kickback guide explains what kickback is and what the manual says about it.
A sled is a different tool for a different job. Our table saw sled guide explains when a sled helps for crosscuts.
Which push stick or block should you buy?
Buy the POWERTEC five-piece set for the most shapes in one set, and the Hedgehog push block for wide stock with a tall handle. Pick the BOW PushPRO for a long stick with a replaceable tip.
Pick the Microjig GRR-RIPPER+ for one adjustable block, and the POWERTEC two-pack for a simple pair at a lower price tier. For the saw itself, see the best table saw for home use roundup.
Before you buy a push stick for a table saw, check the fit, the shapes and the manual's guidance. Use the guard and riving knife as the manual says, and wear eye and ear protection at the saw.
Our top 3 picks at a glance
-
1
Best for a full set of blocks and sticks
POWERTEC Push Block and Push Stick Set, 5 Pieces
8.5/10 our score
See it on Amazon -
2
Best for a tall handle and a grippy base
Hedgehog Woodworking Push Block for Table Saws
8.2/10 our score
See it on Amazon -
3
Best for a longer reach with a replaceable tip
BOW Products PushPRO Push Stick PP1
8.0/10 our score
See it on Amazon
Frequently asked questions
What is the best push stick for a table saw?
For a full set, the POWERTEC five-piece set is the top pick, with blocks and sticks in several shapes. For a single long stick, the BOW PushPRO has a 17.5-inch length and a replaceable tip.
What is the difference between a push stick and a push block?
A push stick is a narrow tool with a handle and a pad or notch at the end, while a push block has a wider base that presses the stock down and forward. The manual says which shape to use for each cut on your saw.
Do I need a push stick on every table saw cut?
Your saw's manual sets when push tools are required and which shape it expects. Check the manual first, since the guard, riving knife and fence setup matter on every cut, not just the ones that use a push tool.
Do push sticks stop kickback?
A push stick can keep your hand farther from the blade, but it doesn't stop kickback on its own. Our kickback guide explains what kickback is, and the manual covers the setup steps that apply to your saw.
